AGI Graphics
Combi FLW
- Simultaneous development of the entire surface of the slab
- Pre-exposure and main exposure with pump and vacuum gauge
- Flat panel fixing compartment with permanent sticker and automatic tilting
- Development section with automatic height adjustment of brushes and with alternating orbital brush movement system. The floor has a proper motion system
- Final cleaning compartment with a rotary cylindrical brush
- Drying compartment with 2 independent drawers
- Post-exposure and anti-tack compartment with LED status indicators
- 9-channel touch screen controller for each of the required thickness and relief: pre-exposure time - main exposure - wash time - post exposure - anti-tack - 2 times for the 2 drying drawer
- Check the water and the dryer temperature
- Detergent dosing pump
- Sand filtration system

Specifications
27/35 | 30/40 | |
Max Sheet Size (mm) | 700×900 | 780x1030 |
Max Sheet Size (inches) | 27"x35" | 30"x40" |
Quantity of bath development (l) | 110 | 110 |
UVA exposure lamps | 16 60W 10R L.1200 | 16 60W 10R L.1200 |
UVA post-exposure lamps | 14 60W 10R L.1200 | 14 60W 10R L.1500 |
UVC lamps | 13 36W L.1200 | 13 36W L.1200 |
Maximum thickness to be developed (mm) | 3.94 | 3.94 |
Power | 230V (3PH+GND) 60Hz 400V (3PH+N+GND) 50Hz |
|
Dimensions (LxWxH) (cm) | 290x180x135 | 290x180x135 |