AGI Graphics
Combi Flexo
- Simultaneous development of the entire surface of the slab
- Pre-exposure
- Main exposure with pump and vacuum gauge
- Fixing plate on the floor with automatic rolling sticky plate
- Development Set with Brush Height Adjustment Settable by PLC and Alternate Orbital Brush System
- During the washing, the slab bearing floor has its own alternating movement
- Final cleaning compartment with a rotary cylindrical brush
- Drying compartment with 2 independent drawers
- Post-exposure and anti-tack subdivision with LED status indicators
- Separate suction systems for washing / oven and for post exposure / anti-tack
- 9-channel touch screen controller for each of the desired thickness and relief: pre-exposure time, main exposure, washing time, automatic regeneration after exposure, anti-tack, time for each of the 2 drawer units
- Automatic solvents loading and unloading
- Check levels in the tub
- Check loading and unloading drum levels
- Thermostat and dryer temperature control

Specifications
27/35 | 30/40 | 36/47 | 42/60 | |
Max Sheet Size (mm) | 700x900 | 780x1067 | 920x1200 | 1070x1530 |
Max Sheet Size (inches) | 27"x35" | 31"x42" | 36"x"47 | 42"x60" |
Quantity of bath development (l) | 90 | 90 | 120 | 140 |
UVA exposure lamps | N.16 60W 10R L.1200 | N.16 60W 10R L.1200 | N.18 80W 10R L.1500 | - |
UVA post-exposure lamps | N.14 60W 10R L.1200 | N.14 60W 10R L.1200 | N.17 80W 10R L.1500 | N.28 80W 10R L.1500 |
UVC lamps | N.13 36W L.1200 | N.13 36W L.1200 | N.16 60W L.1500 | N.27 60W L.1500 |
Maximum thickness to be developed mm | 7 | 7 | 7 | 7 |
Power kw | 15 | 15 | 21 | 21 |
Power | 230V 3PH+GND+60Hz 400V 3PH+N+GND 50Hz |
|||
Dimensions (LxWxH) (cm) | 290x180x135 | 290x180x135 | 320x215x135 | 370x241x135 |